Brass Rectangular Bar, .375" (9.5mm) x 1" (25.4mm) x 6"

Solid Rectangular Bar of Alloy 360 Brass. This corrosion-resistant, free-machining brass can be drilled, milled, tapped, ground and polished to a mirror finish.

This material is available in continuous lengths up to 3'. Bars can be cut or machined to specific dimensions (please inquire).

• Material: Brass 360
• Thickness: .375" ±.005 (9.53mm ±.13)
• Width: 1.000" ±.008 (25.4mm ±.2)
• Length: 6" (15cm) min.
• Net Weight: 314.6g
• Temper: 1/2 Hard (H02)
• Ends: Unfinished or Machined (ask)
• Tensile Strength: 55 ~ 65 ksi
• Yield Strength: 45,000 psi
• Elongation: 25%
• Hardness: Rockwell B35 ~ B78
• Melting Point: 1630°F
• Resistivity: 39.9 Ω cir mil/ft
• Density: 0.307 lbs/cu.in
• Modulus of Elasticity: 14000 ksi
• Modulus of Rigidity: 5300 ksi
• Coefficient of Thermal Expansion: 10.5 x 10^-6 in./in./°F
• Meets: ASTM B16, ASTM B250, SAE J461, SAE J463, AMS 4610H, QQ-B-613D, QQ-B-626D
• RohS: No (contains lead)
• Chemical Composition:

  Cu 61.5%	Zn 35.4%	Pb 2.7%
  Fe .35%	Si .17%