Electropolishing of Nickel, Kovar or Stainless Steel Parts

  • Part: S-CLEAN-K5
  • Weight: 0.001kgs
  • 999 Units in Stock
  • Manufactured by: Hypertriton Inc (Services)


We can perform electropolishing and cleaning of parts (or assemblies) composed of nickel, Kovar and/or stainless steel. We can provide this service economically whether it is for a single piece, just a few parts, or large amounts of parts. Please contact us for a free quote.

Electropolishing is an electrolytic method for reducing or eliminating surface irregularities without the introduction of any polishing compound particles into the surface. Our electropolishing process is preceded by a standard degreasing procedure. Pictured is a stainless steel piece, the left part of which has been electropolished.

  • For Materials: Nickel, Kovar or Stainless Steel
  • Max. Part Dimensions: 30cm x 30cm x 30cm (12" x 12" x 12")
  • Max. Part Weight: 50Kg (110lbs)
  • Typical Process:
    • Ultrasonic degrease
    • Rinse in deionized water
    • Vapor degrease (optional)
    • Mounting of part in glycerin/H2SO4 bath
    • Electropolish strike of 7.5v (@ 80A max.)
    • Maintain 1-5A for 10-15 min.
    • Rinse in deionized water
    • Boil in deionized water (if parts have recesses)

This product was added to our catalog on Saturday 09 April, 2011.

© 2018 Hypertriton, Inc. Contact Us.
Email: sales@ElectronTubeStore.com.
Follow us on: Twitter, YouTube.
Secure Hosting by Csoft.net